Modify Roundabout

The roundabout can be modified in multiple ways. By selecting the roundabout, the following manipulators display.

Roundabout Properties

Like other objects, roundabout holds properties that can be modified. Some are non-geometric and others are geometric (changing the roundabout geometry). Accessing the roundabout properties is accomplished by clicking on the roundabout, which activates the right drawer area.

Property	Description
Name	Change this property anytime to help identify objects. Changing this property will not change the roundabout geometry.
Status	Determines the life cycle of an object. It can be either Proposed, Existing or Construction. The Proposed status determines if the object is used in the cost and quantities calculation. Changing this property will not change the roundabout geometry.
Material	Determine the material to be applied. It can be either Asphalt, Concrete or Gravel.
Tilted Plane Design	Refers to the vertical design method in which a circular profile of the central island is tilted. If set to True, only a single high and low point exists on that profile.
Has Curb	Curb placed between the apron and the circulatory areas.
Has Apron	This is the traversable but raised (usually pavers or stamped concrete) strip interior to the actual drivable circulating width. If set to True, the Apron width and slope can also be adjusted.
Apron Width	Determine the width of the apron.
Slope	Determine the slope of the apron.